• Durable and lightweight, the steel epoxy coated Deckster™ (6 lbs.), replaces heavy traditional cast iron or cement umbrella stands.

• Stand alone - or - when used in conjuction with a table -- the revolutionary new anchoring concept prevents tables from blowing over.

• Anchors adjust to accomodate the width and thickness of the boards on your deck, dock or picnic table. Approximate maximun thickness is 1 5/8".

• Deckster's™easy mobility allows the consumer to safely provide instant shade anywhere on their deck - dock - or picnic table.

• Less expensive than traditional cast iron and cement filled products

• Holds a maximum 1-1/2" diameter pole. Most umbrella poles are 1-1/2" in diameter or less.

• Self-anchoring eliminates need for screws, nails or drilling.

• Attached or removed from deck, dock or picnic table in seconds.

Deckster with a Table

Deckster Stand Alone

INSTALLATION:

Find a suitable location - adjust anchors left or right to custom fit the width of your deck boards. All four anchors should drop easily through the slots between deck boards

Lower base plate until flat - all four anchors will drop below deck.Turn T-BAR directional indicator (located on top of anchor) 1/4 turn - so that - indicator pointing opposite (crossing) slot between deck boards. (T-BAR under deck will now be in position).

Keep indicator in (crossing) position while tightening Wing Knobs (located just below indicator) until tight. Repeat process for all remaining anchors

Place umbrella pole in main tube.

Secure pole by tightening both adjustable screws on main tube

Price: $31.99

Last Updated Wednesday, November 28 2007 @ 04:57 AM EST